Kepco KIT 219-0449, Kit for connecting twor 1000W BOPs Bedienungsanleitung PDF herunterladen

Data subject to change without notice

228-1485 REV 7 051812

INSTRUCTION SHEET

KEPCO

KEPCO, INC.  131-38 SANFORD AVENUE  FLUSHING, NY. 11355 U.S.A.  TEL (718) 461-7000 

FAX (718) 767-1102

http://www.kepcopower.com 

email: [email protected]

An ISO 9001 Company.

CABLE

219-0449

KIT

CABLE KIT NO. 219-0449

BOP 1000W MODELS (2) IN PARALLEL

This kit contains the cables and terminations required to operate two identical 1000 Watt BOP High Power mod-

els in parallel, effectively multiplying the output current capacity by two. Only identical models may be configured

to operate in parallel.

This kit can be used with all 1000W BOP models that have revision levels as shown in Table 1. Earlier models

that have been upgraded to permit multiple unit configurations must include the letter “A” following the revision

number. CAUTION: Failure to install the ground cables supplied can result in damage to the power supply.

Refer to the associated technical manual supplied with the 1000W BOP power supply for all instructions regard-

ing installation and operation of multiple units in parallel.

I. SPECIFICATIONS

Table 3 lists the model parameters unique to a parallel combination of two identical 1000W BOP Power Supplies.

Table 4 lists the general specifications for the parallel combinations listed in Table 3. For specifications not listed

in Table 3, refer to the General Specifications provided in the associated technical manual supplied with each

1000W BOP power supply

TABLE 1. REVISION LEVELS APPLICABLE TO THIS KIT

MG Model Revision

Revisions for previously Upgraded

Units (Must include “A”)

GL Model Revision

BOP 6-125MG All All

BOP 10-75MG 5 or higher 3A or 4A

BOP 20-50MG 8 or higher 5A, 6A or 7A BOP 20-50GL All

BOP 25-40MG All All

BOP 36-28MG 11 or higher 8A, 9A or 10A

BOP 50-20MG 7 or higher 5A or 6A BOP 50-20GL All

BOP 72-14MG 7 or higher 6A

BOP 100-10MG 6 or higher 2A or 4A

TABLE 2. EQUIPMENT SUPPLIED

Item Quantity Purpose

Kepco Part

Number

Common power cable **

(1.5 ft.)

Connects the COMMON terminal of the Master to the COMMON terminal of the

Slave #1.

118-1129

Output Power cable

(1.5 ft.)

Connects the OUTPUT terminal of the Master to the OUTPUT terminal of the

Slave #1.

118-1112

Digital Control (Bitbus)

Cable ** (1.5 ft.)

Provides communication between master and slave. 118-1108

Parallel Control Cable

(1.5 ft.)

Provides control signals required for parallel operation. 118-1119

Protection Cable

(1 ft.)

Provides interlock protection signals required for multiple unit operation. 118-1126

Master - IN Parallel Control

Termination

1 Provides proper termination for Parallel Control Cable. 195-0109

** For GL units: Unclamp and remove ferrite from cable before installation.

1 2

Inhaltsverzeichnis

Seite 1 - INSTRUCTION SHEET

Seite 2 - II. SPECIFICATIONS

KEPCO, INC.  131-38 SANFORD AVENUE  FLUSHING, NY. 11355 U.S.A.  TEL (718) 461-7000 FAX (718) 767-1102  email: [email protected] 228-148

Kommentare zu diesen Handbüchern

Keine Kommentare

Kepco KIT 219-0449, Kit for connecting twor 1000W BOPs Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Stromversorger Kepco KIT 219-0449, Kit for connecting twor 1000W BOPs herunter. KEPCO KIT 219-0449, Kit for connecting twor 1000W BOPs User Manual [ru] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Stromversorger Kepco KIT 219-0449, Kit for connecting twor 1000W BOPs