Kepco RCW 750W Series Bedienungsanleitung

IMPORTANT NOTES:1) The contents of this manual are protected by copyright. Reproduction of any part can bemade only with the specific written permissi

6 RCW 750W 120607FIGURE 4 MOUNTING POSITIONS FOR THE RCW 750W POWER SUPPLY

RCW 750W 120607 73.2 CONNECTING THE LOAD (LOCAL SENSE)To connect the load for local sensing, the shorting links must be maintained between the (+) S

8 RCW 750W 120607FIGURE 6 TERMINAL LOCATIONS OF THE RCW 750W POWER SUPPLY3.5 REMOTE VOLTAGE CONTROL The use of the RV terminal allows for the out

RCW 750W 120607 9FIGURE 7 CONNECTIONS FOR REMOTE VOLTAGE CONTROL OF THE RCW 750W POWER SUPPLY3.6 REMOTE TURN-ON TURN-OFF When power is ON at the s

10 RCW 750W 120607FIGURE 8 PARALLEL CONNECTION OF TWO RCW POWER SUPPLIESNOTES1) Maintain the connecting links between the (+) M and (+) S term

RCW 750W 120607 11The conditions for current equalization are:Output current is 20 to 90% of the total rated output currentEqualization Rate: The outp

12 RCW 750W 120607FIGURE 9 FUNCTIONAL CHECKOUT OF THE RCW 750W POWER SUPPLY

RCW 350W 120607 134.0 ALARM FUNCTIONS4.1 OVERVOLTAGE AND OVERTEMPERATURE PROTECTIONWhen the output voltage or the internal temperature of the RCW 750W

14 RCW 750W 120607During normal operation, the optocoupler transistor is in full conduction (saturation) while duringalarm condition the transistor is

MST SERIES 12/6/07 1Model Number)______________________________________Serial Number_______________________________________Date Purchased:____________

FOLD HEREPleaseplacestamphereKEPCO, INC.131-38 SANFORD AVE.FLUSHING, NY 11355 USACUT HERE

RCW 750W 120607 iTABLE OF CONTENTSSECTION PAGE1.0 Introduction...

RCW 750W 120607 11.0 INTRODUCTION1.1 SCOPE OF MANUALThis Operator's Manual covers the installation and operation of the Kepco RCW 750W Series ofS

2 RCW 750W 120607TABLE 2. POWER SUPPLY RATINGS AND SPECIFICATIONSPECIFICATION DESCRIPTIONInput Voltage Nominal: 100-120Vac or 200-240VacRange: 85-264

RCW 750W 120607 3FIGURE 1 RCW 750W POWER SUPPLY PEAK TO PEAK INPUT SURGE CURRENT FOR T≤50µSShock: (non-operating, 1/2 sine pulse, three shocks on

4 RCW 750W 120607FIGURE 2 PERCENT POWER RATING VERSUS AMBIENT TEMPERATURE 3.0 OPERATION3.1 INSTALLING THE POWER SUPPLY The unit may be mounted in

RCW 750W 120607 5FIGURE 3 MECHANICAL OUTLINE DRAWING OF THE RCW 750W POWER SUPPLY