Kepco DIN KIT MRW 170 (S) Bedienungsanleitung PDF herunterladen

Data subject to change without notice 228-1398 REV 1

INSTRUCTION MANUAL

KIT

KEPCO

KEPCO, INC. l 131-38 SANFORD AVENUE l FLUSHING, NY. 11352 U.S.A. l TEL (718) 461-7000 l

FAX (718) 767-1102

http://www.kepcopower.com l

email: [email protected]

An ISO 9001 Company.

DIN MRW -150S

-160S, -170S

DIN-RAIL MOUNTING KIT

MRW 150/151KV, 160/161KV, 170/171KV

INSTALL CLIPS. Attach left and right clips to power supply using hardware supplied (see Figure 3).

INSTALL CABLE KIT. Attach wires to the power supply per Instruction Sheet supplied with cable kit.

INSTALL POWER SUPPLY ON DIN RAIL. To mount the power supply on the rail insert one end of both clips under

one edge of the rail, then snap the other end of the two clips into place (see Figure 2A).

REMOVING POWER SUPPLY FROM DIN RAIL. While grasping the power supply with one hand, use a screwdriver to

apply leverage towards the left as shown in Figure 2B to disengage each clip from the rail. Where mounting clips are

close together, it may be necessary to apply leverage with two screwdrivers simultaneously.

FIGURE 2. INSTALLATION AND REMOVAL OF POWER SUPPLY FROM DIN RAIL

TABLE 1. COMPONENTS SUPPLIED

KIT

MODEL NO.

COVER

PART NO.

CABLE KIT

PART NO.

CLIP

(QTY 2)

PART NO.

BRACKET

(QTY 2)

PART NO.

SCREW (QTY 4)

PART NO.

WASHER (QTY4)

PART NO.

DIN MRW-150S CA 19 KIT 219-0184 108-0362 128-2004

101-0383

(8-32 X 0.187 PHPH)

103-0017

(NO. 8, INT. TOOTH)

DIN MRW-160S CA 20 KIT 219-0184 108-0362 128-2004

101-0383

(8-32 X 0.187 PHPH)

103-0017

(NO. 8, INT. TOOTH)

DIN MRW-170S CA 20 KIT 219-0239 108-0362 128-2004

101-0383

(8-32 X 0.187 PHPH)

103-0017

(NO. 8, INT. TOOTH)

NOTE: Clip and Bracket are supplied preassembled into left and right mounting clip assemblies. To replace a mounting clip assembly, order

both the clip and bracket and assemble per Figure 3 detail.

A -

INSTALLATION

B -

REMOVAL

DESCRIPTION. Kepco KITs, Models DIN MRW-150S,

-160S, and -170S each contain a cover, cable kit, left

and right mounting clips, and associated hardware

(see Table 1) used to install MRW Series power sup-

plies on a DIN rail. The -150S suffix is for MRW

150KV and 151KV Models, -160S is for MRW 160KV

and 161KV models and -170S is for MRW 170KV and

171KV models. The S” suffix is for mounting along the

short dimension (width) as shown in Figure 1. Outline

dimensions are shown in Figure 4.

INSTALL COVER. Attach the cover to the power sup-

ply per Instruction Manual supplied with the cover.

FIGURE 1. S SUFFIX ORIENTATION

1 2

228-1398 REV 1 061901 2

Inhaltsverzeichnis

Seite 1

Seite 2 - 228-1398 REV 1 061901

2228-1398 REV 1 061901KEPCO, INC. l 131-38 SANFORD AVENUE l FLUSHING, NY. 11352 U.S.A. l TEL (718) 461-7000 l FAX (718) 767-1102 http://www.

Kommentare zu diesen Handbüchern

Keine Kommentare

Kepco DIN KIT MRW 170 (S) Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Stromversorger Kepco DIN KIT MRW 170 (S) herunter. KEPCO DIN KIT MRW 170 (S) User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Stromversorger Kepco DIN KIT MRW 170 (S)